Pay in 4 interest-free payments of $14.96 Learn more
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
014-1062-030 volgplaat van 310 mm met veer
They allow an optimal placing in every
They are suitable for transferring a lot of types of grease
It is particularly advised for the use with high viscosity lubricants and medias (from 200CPS to 500CPS)
These pumps are advised for the transfer of low viscosity oil (SAE 15/80)
014-1061-030 - Follower plate for pumps with shank 30 mm subgroup-Industriële pneumatische oliepompen 014-1062-030 volgplaat van 310 mmIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.
US$ 69.00
US$ 35.75
US$ 29.95
US$ 64.90
US$ 49.95
US$ 10.21
US$ 59.95
US$ 49.95
US$ 89.95
US$ 14.95
US$ 35.75
US$ 100.32