AST Rollcages V2 Removable Bolt-In Rear Roll Cage for BMW 1-Series E81 (3-Door) Mitsubishi While this system is quite

While this system is quite suitable for engine pre-lubrication its performance remains limited in terms of controlling pressure variations

It has two inlets and one outlet with a 9/16"x18 thread (equivalent to Dash 6 or AN6) as well as a 1/8" NPT port for the connection of a fuel pressure gauge or  an optional banjo fitting

AEM MAP 7 bar Sensor Kit SpecificationsThis MAP (Manifold Absolute Pressure) sensor can support an absolute pressure of 7 bars equivalent to a boost pressure of 6 bars

The stock quantity is visible above next to the "add to cart" button

ACL Race Main Bearings Honda F23Designed to withstand high RPM temperatures and load these high strength bearings are manufactured by ACL from 3 layers of hardened steel copper and nickel

AST Rollcages V2 Removable Bolt-In Rear Roll Cage for BMW 1-Series E81 (3-Door) Mitsubishi While this system is quiteAST Roll Cages SpecificationsAttention : AST roll cages designed and built according to FIA Appendix J may not be approved depending on the year of preparation of your car. Indeed the safety requirements are often revised in Appendix J by the FIA. Check with your Federation Sporting Organisation for the minimum safety requirements specific to your vehicle version engine and type of event and or championship to be contested. AST roll cages have 4 to 10